fbpx

DGP-PG3-A-V2: Piranha III Tungsten Grinder with Vacuum System

$2,715.00

Clear

This grinder is designed for maximum commercial use and includes a universal collet which will grind from .040.-3/16. The construction of the PIII unit is heavy solid steel and very user-friendly. The Piranha III unit is also fully enclosed with a 90% containment of excess tungsten electrode dust. Includes vacuum system, as well as, foam insulated cabinet and flexible spotlight.

Specifications

  • Range of Included Angle: 10 to 60 degrees
  • Electrode Diameters: 040″ (1.0mm), 1/16″ (1.6mm), 3/32″ (2.4mm), 1/8″ (3.2mm), 5/32″ (4.0mm), 3/16″ (4.8mm)
  • Minimum Electrode Length: .75″ (19.05mm)
  • Voltage: 100/120 VAC, 50/60Hz, 220v
  • Power Consumption: 500 Watts
  • Motor: 1/3 hp, 1,680 rpm, 5.0 amps
  • Dimensions: Length: 20″ (508mm) Width: 12″ (304.8mm) Height: 12″ (304.8mm) Weight: 51 lbs (23.13 kg)

Features

  • Safety
    Enclosed grinding area captures Tungsten dust for easy disposal.
  • Weld Quality
    20 Ra surface finish improves Tungsten life, arc starting, arc stability & produces consistent weld penetration.
  • Productivity
    Correctly & consistently diamond grind your Tungsten Electrode (up to 3/16”) longitudinally in less than 30 seconds.
  • Value
    Diamond grinds, flats & notches your Tungsten economically.
  • Sliding dust shield for 100% dust containment
  • Integrated receptacle area for ease of handling electrodes
  • Recessed handle for better form & function
  • On/off switch with LED light for improved display of unit operation
  • Lightened chassis for reduced weight
  • Signature blue powdercoat
  • Easy set up, optimal consistency and near-perfect repeatability
  • Compact, durable and solid design with no vibration
  • Longitudinal 20 RA grinding for maximum arc starting, arc stability, electrode life and weld penetration
  • Universal collet arm for 6 electrode sizes – 040” (1.0mm), 1/16” (1.6mm), 3/32” (2.4mm), 1/8” (3.2mm), 5/32” (4.0mm) & 3/16” (4.8mm) – with no equipment changes
  • Included angle scale for angles from 10° – 60°
  • Precision tip flat gauge & depth adjustment stop ensures exact Tungsten points every time – enabling consistent, repeatable arc performance and welding output
  • Dust Shield & Containment Baffle to keep 100% of dust inside the grinder housing, for safety and easy disposal
  • Tip flat block for square end grinding and removing bad tips
  • Electrode notching station for simple cut-off
  • Detailed Manual with valuable engineering data and welding recommendations
  • Port ready for Vacuum upgrade
  • Integrated receptacle for electrode storage/access
  • Recessed carry handle for better form & function
Tungsten GrinderPriceDimensionsWeightTungsten DiametersGrind RangeFinishTip FlatNotch CutExact CutMicrometer IndexerGeneral GrindingDiamond GrindingVacuum
Piranha II
Part# DPG-PG2-A
$875.0014" x 10" x 9"14 lbs.040" - 3/32"10° - 60°20 Ra
Piranha II with Cabinet
Part# DGP-PG2-A-V2
$1,995.0036" x 36" x 52"141 lbs.040" - 3/32"10° - 60°20 Ra
Piranha III
Part# DGP-PG3-A
$1,595.0020" x 16" x 16"38 lbs.040" - 3/16"10° - 60°20 Ra
Piranha III with Cabinet
Part# DGP-PG3-A-V2
$2,715.0036" x 36" x 52"165 lbs.040" - 3/16"10° - 60°20 Ra
DGP Series - Model 1
Part # DGP-1-A
$1,564.0024" x 17" x 20"42 lbs.040" - 3/16"6° - 120°20 Ra
DGP Series - Model 1 w/ Vacuum System Upgrade
Part# DGP-1-A-V2
$2,684.0036" x 36" x 52"163 lbs.040" - 3/16"6° - 120°20 Ra
DGP Series - Model 2
Part# DGP-2-A
$1,996.0024" x 17" x 20"42 lbs.040" - 3/16"6° - 120°20 Ra
DGP Series - Model 2 w/ Vacuum System Upgrade
Part# DGP-2-A-V2
$3,116.0036" x 36" x 52"163 lbs.040" - 3/16"6° - 120°20 Ra
DGP Series - Model 3
Part# DGP-3-A
$2,115.0024" x 17" x 20"42 lbs.040" - 3/16"6° - 120°20 Ra
DGP Series - Model 3 w/ Vacuum System Upgrade
Part# DGP-3-A-V2
$3,235.0036" x 36" x 52"163 lbs.040" - 3/16"6° - 120°20 Ra
Tungsten GrinderPriceDimensionsWeightTungsten DiametersGrind RangeFinishTip FlatNotch CutExact CutMicrometer IndexerGeneral GrindingDiamond GrindingVacuum